In life, we see that many electronic weighbridges will increase the slope. Why? Those who are familiar with the electronic weighbridge should know that the weighbridge mostly adopts the structure without foundation pit, and the height of the weighbridge is higher than the ground. If the vehicle is to be weighed, a slope must be increased to reach the weighbridge to complete the weighing task. So today, let's look at the role of electronic weighbridge and ramp:
First, the approach slope can be used as the overload of vehicles.
The large electronic weighbridge will not be directly flush with the ground when installed, but has a certain height, which will be higher after the installation of the shallow foundation pit. So if the car is too hard, it will directly hit the bottom of the scale, which is very troublesome. However, if you drop the scale without a guide slope, it will cause great damage to the weighbridge and affect the transportation of goods on the vehicle. Therefore, it is necessary to install the guide slope, not only considering the vehicle weight, but also considering the vehicle weight. However, for some of them, the goods on the weighbridge are not all cars, so the merchants do not feel the need to go downhill, which also exists.
Second, the ramp can facilitate transportation.
Because sometimes, some goods are not transported by car. They may be barreled goods or bulk goods, such as crops. If there is a slope, you can use some tools with small wheels to push the crops onto the electronic scale. Without this guide slope, the tools on these wheels cannot enter the scale for weighing.
Thirdly, the slope method can protect the ground scale.
The height of the electronic weighbridge from the ground is different, so there are gaps. If there is no front slope, cars or other goods will hit the surface of the weighbridge and cause certain damage to the weighbridge. So there is a guide slope to prevent other things from touching the surface of the scale and causing damage to the scale. If there is no front slope, it is even more dangerous.
It can be seen that the method of adding slope to the electronic weighbridge is very important. Pay attention to it during installation.